Cart is empty
No items found matching the search criteria
Ranger-Green: A dark green shade, very natural and elegant.
Titanium-Grey MK2: A very pure medium to dark grey shade without any color tint.
Vanilla-Sands: A very luxurious beige shade with a touch of vanilla.
Copper-Brown: A beautiful brown shade with the unique copper color touch.
Commando-Green: An olive green shade, very natural and modern.
Grand-Bleu: A very deep and luxurious blue shade, as beautiful as it gets and good replacement for black.
Shade-19: A super elegant replacement for black, this anthracite is absolutely luxurious.
B-Magic: A blue of absolute purity, with absolutely no tint at all.
Red: A bright red shade, intense and what you expect of a standard red.
MDPC-X Sleeve sample pack up to 3 colors. Each sleeve piece has an approximate length of 30cm.
As with the famous MDPC-X Sleeving, the MDPC heatshrink quality is globally regarded as the best-in-class, since MDPC started in 2007.
Instead of beginning to talk about all kind of technical data, test results and specifications, here is what users typically told us about our heatshrinks: "Hello MDPC, I just wanted to tell you that I have used so many different heatshrinks in my professional career, but yours top them all in every aspect."
MDPC just offers what can’t be exceeded in quality; otherwise we would not offer it. While most manufacturers of heatshrinks went the cost-saving route in the last years and the available quality degraded, our quality stayed the same.
To sum up what MDPC-X heatshrink stands for: Only the best in heatshrink-technology and design is good enough for us. If something could be done better, we have already done it.
You either need a heatgun or lighter to shrink the heatshrink. A hair-dryer is not enough to shrink to the minimum diameter. For colored heatshrinks, we recommend to only use a heatgun.
Using a lighter, the best technique is as follows: Only use the lower portion of the flame (the flame should be at least 3 cm long) and move it into the heatshrink and out of it again and again, while twisting the cable & heatshrink from time to time, so you heat it up at different sides.
Let the heatshrink completely cool down, before you apply any length-stretching-force onto the MDPC-X Sleeve. Once the heatshrink is cooled down, it turns hard and holds the sleeve in position. If you want to move a cable-end into a connector (i. e. ATX wire into ATX connector), you can heat up the front of the heatshrink, so it gets soft again and adjusts perfectly to the inner shape of a connector. Learn more about using our heatshrink for “melting” techniques in the previous section.
Just take a long-nosed plier and put the heatshrink over the closed tips. Then you carefully open the pliers so the heatshrink gets stretched. Reposition the heatshrink so the stretching applies on other areas of the surface too. This avoids that the surface gets too unstable at the over-expanded area. Experiment with these techniques and you will quickly learn what you can do and what not. When you heat up an over-expanded heatshrink, be more careful with the heat application than you usually are. Let it cool down from time to time. Mastering this technique allows you to get the heatshrink over connectors, which are slightly too big for the "regular" heatshrink size.
Here are the most important specifications, which might help you in your work with our heatshrinks.
We constantly keep our heatshrinks on top of what's technically possible - today and in the future.
Steliou Kyriakidi 45
+357 7000 5095
+357 2525 5050
All Prices include 19% VAT. © 2011-2020 Custom PC Solutions LTD [Custom PC Systems]. This website is operated by Custom PC Solutions LTD.