Heatshrink

AXAGON CLR-M2L10 passive M.2-SSD-Heatsink - 2280, 10 mm Height, Aluminium, black

50 item(s)

Return period: 720 days

Weight: 0.040 kg

Product Code:101843

Manufacturer: Axagon

Dimensions: 10 x 22 x 77 mm (H x W x D) Weight: 19g Material: aluminum Color: Black Compatibility: M.2 SSDs in format 2280 (NVMe or SATA, populated on one or both sides) Package content: 1x AXAGON CLR-M2L10 2x thermal pads 1x mounting material 1x screwdriver

Manufacturer: Axagon

Manufacturer Part Number: CLR-M2L10

€4⁷² (€3⁹⁷ excluding VAT)

Quantity:

+ −

Add to cart

MDPC-X Heatshrink 4:1 SMALL - Yellow, 1m

30 item(s)

Return period: 720 days

Weight: 0.010 kg

Product Code:27327

Manufacturer: MDPC-X

Yellow MK2: A fresh and warm yellow in a very natural and not chemical shade, highly fluorescend.

Manufacturer: MDPC-X

Manufacturer Part Number: HS-S-YL

€3⁴³ (€2⁸⁸ excluding VAT)

Quantity:

+ −

Add to cart

MDPC-X Heatshrink 4:1 SMALL - Blue, 1m

50 item(s)

Return period: 720 days

Weight: 0.010 kg

Product Code:27326

Manufacturer: MDPC-X

Heatshrink 4:1 SMALL:•The inner diameter is 7.0mm before shrinking•After maximum shrinking, the inner diameter is 1.75mm•Shrink ratio of 4 to 1

No compromise – the highest level in heatshrink quality

As with the famous MDPC-X Sleeving, the MDPC heatshrink quality is globally regarded as the best-in-class, since MDPC started in 2007.

Instead of beginning to talk about all kind of technical data, test results and specifications, here is what users typically told us about our heatshrinks: "Hello MDPC, I just wanted to tell you that I have used so many different heatshrinks in my professional career, but yours top them all in every aspect."

MDPC just offers what can’t be exceeded in quality; otherwise we would not offer it. While most manufacturers of heatshrinks went the cost-saving route in the last years and the available quality degraded, our quality stayed the same.

What makes a good heatshrink for us?

First of all we like ultra-thin walls. It just looks awesome and you can easily over-expand it in order to extend its original diameter even more. MDPC offers the thinnest walls in relation to its corresponding shrink-ration.
We love a high shrink-ratio, so one heatshrink-size can be used in many situations easily and effectively. "1:1" would mean that it does not shrink at all. "2:1" means that it shrinks down to 1/2 of its original diameter. "3:1" means that it shrinks to 1/3, "4:1" means that it shrinks down to an amazing 1/4. MDPC offers unusual shrink-rates, which make your work as easy as possible.
Absolutely smooth surfaces with a matte appearance is not a very common combination, but MDPC gives this to you.
While being ultra-thin, it is important that the heatshrink does not burn so quickly. With this property, it is easy to melt MDPC Sleeve underneath the shrink by applying temperatures of more than 250°C. The very thin walls help you to see when the sleeve melts. You recognize it as soon as the footprint of the sleeving edge underneath the heatshrink turns into a smooth transition.
Different colors are very important, so people can color-code their cables and of course support their designs in a beautiful way.

To sum up what MDPC-X heatshrink stands for: Only the best in heatshrink-technology and design is good enough for us. If something could be done better, we have already done it.

How to use heatshrink in combination with MDPC-X sleeve

You either need a heatgun or lighter to shrink the heatshrink. A hair-dryer is not enough to shrink to the minimum diameter. For colored heatshrinks, we recommend to only use a heatgun.

Using a lighter, the best technique is as follows: Only use the lower portion of the flame (the flame should be at least 3 cm long) and move it into the heatshrink and out of it again and again, while twisting the cable & heatshrink from time to time, so you heat it up at different sides.

Let the heatshrink completely cool down, before you apply any length-stretching-force onto the MDPC-X Sleeve. Once the heatshrink is cooled down, it turns hard and holds the sleeve in position. If you want to move a cable-end into a connector (i. e. ATX wire into ATX connector), you can heat up the front of the heatshrink, so it gets soft again and adjusts perfectly to the inner shape of a connector. Learn more about using our heatshrink for “melting” techniques in the previous section.

FAQ: How do I over-expand my heatshrink?

Just take a long-nosed plier and put the heatshrink over the closed tips. Then you carefully open the pliers so the heatshrink gets stretched. Reposition the heatshrink so the stretching applies on other areas of the surface too. This avoids that the surface gets too unstable at the over-expanded area. Experiment with these techniques and you will quickly learn what you can do and what not. When you heat up an over-expanded heatshrink, be more careful with the heat application than you usually are. Let it cool down from time to time. Mastering this technique allows you to get the heatshrink over connectors, which are slightly too big for the "regular" heatshrink size.

Technical properties of current generation MDPC heatshrinks

Here are the most important specifications, which might help you in your work with our heatshrinks.

the heatshrinks will start to shrink at ~95°C
the heatshrinks can be constantly exposed to 160°C
for a couple of hours, you can expose the heatshrinks to 240°C without melting or breaking effects
no corrosion effects in contact with copper
very low water absorption of only ~0.25%
dielectric strength of 20KV per mm
very good resistance to chemicals, oil, cleaning agents
no printings on the heatshrinks

We constantly keep our heatshrinks on top of what's technically possible - today and in the future.

Manufacturer: MDPC-X

Manufacturer Part Number: HS-S-BL

€3⁵⁵ (€2⁹⁸ excluding VAT)

Quantity:

+ −

Add to cart

MDPC-X Heatshrink 4:1 SMALL - Green, 1m

30 item(s)

Return period: 720 days

Weight: 0.010 kg

Product Code:27325

Manufacturer: MDPC-X

Heatshrink 4:1 SMALL:•The inner diameter is 7.0mm before shrinking•After maximum shrinking, the inner diameter is 1.75mm•Shrink ratio of 4 to 1

No compromise – the highest level in heatshrink quality

As with the famous MDPC-X Sleeving, the MDPC heatshrink quality is globally regarded as the best-in-class, since MDPC started in 2007.

Instead of beginning to talk about all kind of technical data, test results and specifications, here is what users typically told us about our heatshrinks: "Hello MDPC, I just wanted to tell you that I have used so many different heatshrinks in my professional career, but yours top them all in every aspect."

MDPC just offers what can’t be exceeded in quality; otherwise we would not offer it. While most manufacturers of heatshrinks went the cost-saving route in the last years and the available quality degraded, our quality stayed the same.

What makes a good heatshrink for us?

First of all we like ultra-thin walls. It just looks awesome and you can easily over-expand it in order to extend its original diameter even more. MDPC offers the thinnest walls in relation to its corresponding shrink-ration.
We love a high shrink-ratio, so one heatshrink-size can be used in many situations easily and effectively. "1:1" would mean that it does not shrink at all. "2:1" means that it shrinks down to 1/2 of its original diameter. "3:1" means that it shrinks to 1/3, "4:1" means that it shrinks down to an amazing 1/4. MDPC offers unusual shrink-rates, which make your work as easy as possible.
Absolutely smooth surfaces with a matte appearance is not a very common combination, but MDPC gives this to you.
While being ultra-thin, it is important that the heatshrink does not burn so quickly. With this property, it is easy to melt MDPC Sleeve underneath the shrink by applying temperatures of more than 250°C. The very thin walls help you to see when the sleeve melts. You recognize it as soon as the footprint of the sleeving edge underneath the heatshrink turns into a smooth transition.
Different colors are very important, so people can color-code their cables and of course support their designs in a beautiful way.

To sum up what MDPC-X heatshrink stands for: Only the best in heatshrink-technology and design is good enough for us. If something could be done better, we have already done it.

How to use heatshrink in combination with MDPC-X sleeve

You either need a heatgun or lighter to shrink the heatshrink. A hair-dryer is not enough to shrink to the minimum diameter. For colored heatshrinks, we recommend to only use a heatgun.

Using a lighter, the best technique is as follows: Only use the lower portion of the flame (the flame should be at least 3 cm long) and move it into the heatshrink and out of it again and again, while twisting the cable & heatshrink from time to time, so you heat it up at different sides.

Let the heatshrink completely cool down, before you apply any length-stretching-force onto the MDPC-X Sleeve. Once the heatshrink is cooled down, it turns hard and holds the sleeve in position. If you want to move a cable-end into a connector (i. e. ATX wire into ATX connector), you can heat up the front of the heatshrink, so it gets soft again and adjusts perfectly to the inner shape of a connector. Learn more about using our heatshrink for “melting” techniques in the previous section.

FAQ: How do I over-expand my heatshrink?

Just take a long-nosed plier and put the heatshrink over the closed tips. Then you carefully open the pliers so the heatshrink gets stretched. Reposition the heatshrink so the stretching applies on other areas of the surface too. This avoids that the surface gets too unstable at the over-expanded area. Experiment with these techniques and you will quickly learn what you can do and what not. When you heat up an over-expanded heatshrink, be more careful with the heat application than you usually are. Let it cool down from time to time. Mastering this technique allows you to get the heatshrink over connectors, which are slightly too big for the "regular" heatshrink size.

Technical properties of current generation MDPC heatshrinks

Here are the most important specifications, which might help you in your work with our heatshrinks.

the heatshrinks will start to shrink at ~95°C
the heatshrinks can be constantly exposed to 160°C
for a couple of hours, you can expose the heatshrinks to 240°C without melting or breaking effects
no corrosion effects in contact with copper
very low water absorption of only ~0.25%
dielectric strength of 20KV per mm
very good resistance to chemicals, oil, cleaning agents
no printings on the heatshrinks

We constantly keep our heatshrinks on top of what's technically possible - today and in the future.

Manufacturer: MDPC-X

Manufacturer Part Number: HS-S-GR

€3⁴³ (€2⁸⁸ excluding VAT)

Quantity:

+ −

Add to cart

MDPC-X Heatshrink 4:1 SMALL - White, 1m

28 item(s)

Return period: 720 days

Weight: 0.010 kg

Product Code:27324

Manufacturer: MDPC-X

Heatshrink 4:1 SMALL:•The inner diameter is 7.0mm before shrinking•After maximum shrinking, the inner diameter is 1.75mm•Shrink ratio of 4 to 1

No compromise – the highest level in heatshrink quality

As with the famous MDPC-X Sleeving, the MDPC heatshrink quality is globally regarded as the best-in-class, since MDPC started in 2007.

Instead of beginning to talk about all kind of technical data, test results and specifications, here is what users typically told us about our heatshrinks: "Hello MDPC, I just wanted to tell you that I have used so many different heatshrinks in my professional career, but yours top them all in every aspect."

MDPC just offers what can’t be exceeded in quality; otherwise we would not offer it. While most manufacturers of heatshrinks went the cost-saving route in the last years and the available quality degraded, our quality stayed the same.

What makes a good heatshrink for us?

First of all we like ultra-thin walls. It just looks awesome and you can easily over-expand it in order to extend its original diameter even more. MDPC offers the thinnest walls in relation to its corresponding shrink-ration.
We love a high shrink-ratio, so one heatshrink-size can be used in many situations easily and effectively. "1:1" would mean that it does not shrink at all. "2:1" means that it shrinks down to 1/2 of its original diameter. "3:1" means that it shrinks to 1/3, "4:1" means that it shrinks down to an amazing 1/4. MDPC offers unusual shrink-rates, which make your work as easy as possible.
Absolutely smooth surfaces with a matte appearance is not a very common combination, but MDPC gives this to you.
While being ultra-thin, it is important that the heatshrink does not burn so quickly. With this property, it is easy to melt MDPC Sleeve underneath the shrink by applying temperatures of more than 250°C. The very thin walls help you to see when the sleeve melts. You recognize it as soon as the footprint of the sleeving edge underneath the heatshrink turns into a smooth transition.
Different colors are very important, so people can color-code their cables and of course support their designs in a beautiful way.

To sum up what MDPC-X heatshrink stands for: Only the best in heatshrink-technology and design is good enough for us. If something could be done better, we have already done it.

How to use heatshrink in combination with MDPC-X sleeve

You either need a heatgun or lighter to shrink the heatshrink. A hair-dryer is not enough to shrink to the minimum diameter. For colored heatshrinks, we recommend to only use a heatgun.

Using a lighter, the best technique is as follows: Only use the lower portion of the flame (the flame should be at least 3 cm long) and move it into the heatshrink and out of it again and again, while twisting the cable & heatshrink from time to time, so you heat it up at different sides.

Let the heatshrink completely cool down, before you apply any length-stretching-force onto the MDPC-X Sleeve. Once the heatshrink is cooled down, it turns hard and holds the sleeve in position. If you want to move a cable-end into a connector (i. e. ATX wire into ATX connector), you can heat up the front of the heatshrink, so it gets soft again and adjusts perfectly to the inner shape of a connector. Learn more about using our heatshrink for “melting” techniques in the previous section.

FAQ: How do I over-expand my heatshrink?

Just take a long-nosed plier and put the heatshrink over the closed tips. Then you carefully open the pliers so the heatshrink gets stretched. Reposition the heatshrink so the stretching applies on other areas of the surface too. This avoids that the surface gets too unstable at the over-expanded area. Experiment with these techniques and you will quickly learn what you can do and what not. When you heat up an over-expanded heatshrink, be more careful with the heat application than you usually are. Let it cool down from time to time. Mastering this technique allows you to get the heatshrink over connectors, which are slightly too big for the "regular" heatshrink size.

Technical properties of current generation MDPC heatshrinks

Here are the most important specifications, which might help you in your work with our heatshrinks.

the heatshrinks will start to shrink at ~95°C
the heatshrinks can be constantly exposed to 160°C
for a couple of hours, you can expose the heatshrinks to 240°C without melting or breaking effects
no corrosion effects in contact with copper
very low water absorption of only ~0.25%
dielectric strength of 20KV per mm
very good resistance to chemicals, oil, cleaning agents
no printings on the heatshrinks

We constantly keep our heatshrinks on top of what's technically possible - today and in the future.

Manufacturer: MDPC-X

Manufacturer Part Number: HS-S-WT

€3⁴³ (€2⁸⁸ excluding VAT)

Quantity:

+ −

Add to cart

MDPC-X Heatshrink 3.4:1 SATA - Anthracite, 0.35m

11 item(s)

Return period: 720 days

Weight: 0.010 kg

Product Code:27321

Manufacturer: MDPC-X

Heatshrink 3.4:1 SATA: • The inner diameter is 13.0mm before shrinking • After maximum shrinking, the inner diameter is 3.8mm • Shrink ratio of 3.4 to 1

No compromise – the highest level in heatshrink quality

As with the famous MDPC-X Sleeving, the MDPC heatshrink quality is globally regarded as the best-in-class, since MDPC started in 2007.

Instead of beginning to talk about all kind of technical data, test results and specifications, here is what users typically told us about our heatshrinks: "Hello MDPC, I just wanted to tell you that I have used so many different heatshrinks in my professional career, but yours top them all in every aspect."

MDPC just offers what can’t be exceeded in quality; otherwise we would not offer it. While most manufacturers of heatshrinks went the cost-saving route in the last years and the available quality degraded, our quality stayed the same.

What makes a good heatshrink for us?

First of all we like ultra-thin walls. It just looks awesome and you can easily over-expand it in order to extend its original diameter even more. MDPC offers the thinnest walls in relation to its corresponding shrink-ration.
We love a high shrink-ratio, so one heatshrink-size can be used in many situations easily and effectively. "1:1" would mean that it does not shrink at all. "2:1" means that it shrinks down to 1/2 of its original diameter. "3:1" means that it shrinks to 1/3, "4:1" means that it shrinks down to an amazing 1/4. MDPC offers unusual shrink-rates, which make your work as easy as possible.
Absolutely smooth surfaces with a matte appearance is not a very common combination, but MDPC gives this to you.
While being ultra-thin, it is important that the heatshrink does not burn so quickly. With this property, it is easy to melt MDPC Sleeve underneath the shrink by applying temperatures of more than 250°C. The very thin walls help you to see when the sleeve melts. You recognize it as soon as the footprint of the sleeving edge underneath the heatshrink turns into a smooth transition.
Different colors are very important, so people can color-code their cables and of course support their designs in a beautiful way.

To sum up what MDPC-X heatshrink stands for: Only the best in heatshrink-technology and design is good enough for us. If something could be done better, we have already done it.

How to use heatshrink in combination with MDPC-X sleeve

You either need a heatgun or lighter to shrink the heatshrink. A hair-dryer is not enough to shrink to the minimum diameter. For colored heatshrinks, we recommend to only use a heatgun.

Using a lighter, the best technique is as follows: Only use the lower portion of the flame (the flame should be at least 3 cm long) and move it into the heatshrink and out of it again and again, while twisting the cable & heatshrink from time to time, so you heat it up at different sides.

Let the heatshrink completely cool down, before you apply any length-stretching-force onto the MDPC-X Sleeve. Once the heatshrink is cooled down, it turns hard and holds the sleeve in position. If you want to move a cable-end into a connector (i. e. ATX wire into ATX connector), you can heat up the front of the heatshrink, so it gets soft again and adjusts perfectly to the inner shape of a connector. Learn more about using our heatshrink for “melting” techniques in the previous section.

FAQ: How do I over-expand my heatshrink?

Just take a long-nosed plier and put the heatshrink over the closed tips. Then you carefully open the pliers so the heatshrink gets stretched. Reposition the heatshrink so the stretching applies on other areas of the surface too. This avoids that the surface gets too unstable at the over-expanded area. Experiment with these techniques and you will quickly learn what you can do and what not. When you heat up an over-expanded heatshrink, be more careful with the heat application than you usually are. Let it cool down from time to time. Mastering this technique allows you to get the heatshrink over connectors, which are slightly too big for the "regular" heatshrink size.

Technical properties of current generation MDPC heatshrinks

Here are the most important specifications, which might help you in your work with our heatshrinks.

the heatshrinks will start to shrink at ~95°C
the heatshrinks can be constantly exposed to 160°C
for a couple of hours, you can expose the heatshrinks to 240°C without melting or breaking effects
no corrosion effects in contact with copper
very low water absorption of only ~0.25%
dielectric strength of 20KV per mm
very good resistance to chemicals, oil, cleaning agents
no printings on the heatshrinks

We constantly keep our heatshrinks on top of what's technically possible - today and in the future.

Manufacturer: MDPC-X

Manufacturer Part Number: HS-SA-BK

€2⁰² (€1⁷⁰ excluding VAT)

Quantity:

+ −

Add to cart

MDPC-X Heatshrink 4:1 SMALL - Anthracite, 1m

21 item(s)

Return period: 720 days

Weight: 0.010 kg

Product Code:27298

Manufacturer: MDPC-X

Heatshrink 4:1 SMALL:•The inner diameter is 7.0mm before shrinking•After maximum shrinking, the inner diameter is 1.75mm•Shrink ratio of 4 to 1

No compromise – the highest level in heatshrink quality

As with the famous MDPC-X Sleeving, the MDPC heatshrink quality is globally regarded as the best-in-class, since MDPC started in 2007.

Instead of beginning to talk about all kind of technical data, test results and specifications, here is what users typically told us about our heatshrinks: "Hello MDPC, I just wanted to tell you that I have used so many different heatshrinks in my professional career, but yours top them all in every aspect."

MDPC just offers what can’t be exceeded in quality; otherwise we would not offer it. While most manufacturers of heatshrinks went the cost-saving route in the last years and the available quality degraded, our quality stayed the same.

What makes a good heatshrink for us?

First of all we like ultra-thin walls. It just looks awesome and you can easily over-expand it in order to extend its original diameter even more. MDPC offers the thinnest walls in relation to its corresponding shrink-ration.
We love a high shrink-ratio, so one heatshrink-size can be used in many situations easily and effectively. "1:1" would mean that it does not shrink at all. "2:1" means that it shrinks down to 1/2 of its original diameter. "3:1" means that it shrinks to 1/3, "4:1" means that it shrinks down to an amazing 1/4. MDPC offers unusual shrink-rates, which make your work as easy as possible.
Absolutely smooth surfaces with a matte appearance is not a very common combination, but MDPC gives this to you.
While being ultra-thin, it is important that the heatshrink does not burn so quickly. With this property, it is easy to melt MDPC Sleeve underneath the shrink by applying temperatures of more than 250°C. The very thin walls help you to see when the sleeve melts. You recognize it as soon as the footprint of the sleeving edge underneath the heatshrink turns into a smooth transition.
Different colors are very important, so people can color-code their cables and of course support their designs in a beautiful way.

To sum up what MDPC-X heatshrink stands for: Only the best in heatshrink-technology and design is good enough for us. If something could be done better, we have already done it.

How to use heatshrink in combination with MDPC-X sleeve

You either need a heatgun or lighter to shrink the heatshrink. A hair-dryer is not enough to shrink to the minimum diameter. For colored heatshrinks, we recommend to only use a heatgun.

Using a lighter, the best technique is as follows: Only use the lower portion of the flame (the flame should be at least 3 cm long) and move it into the heatshrink and out of it again and again, while twisting the cable & heatshrink from time to time, so you heat it up at different sides.

Let the heatshrink completely cool down, before you apply any length-stretching-force onto the MDPC-X Sleeve. Once the heatshrink is cooled down, it turns hard and holds the sleeve in position. If you want to move a cable-end into a connector (i. e. ATX wire into ATX connector), you can heat up the front of the heatshrink, so it gets soft again and adjusts perfectly to the inner shape of a connector. Learn more about using our heatshrink for “melting” techniques in the previous section.

FAQ: How do I over-expand my heatshrink?

Just take a long-nosed plier and put the heatshrink over the closed tips. Then you carefully open the pliers so the heatshrink gets stretched. Reposition the heatshrink so the stretching applies on other areas of the surface too. This avoids that the surface gets too unstable at the over-expanded area. Experiment with these techniques and you will quickly learn what you can do and what not. When you heat up an over-expanded heatshrink, be more careful with the heat application than you usually are. Let it cool down from time to time. Mastering this technique allows you to get the heatshrink over connectors, which are slightly too big for the "regular" heatshrink size.

Technical properties of current generation MDPC heatshrinks

Here are the most important specifications, which might help you in your work with our heatshrinks.

the heatshrinks will start to shrink at ~95°C
the heatshrinks can be constantly exposed to 160°C
for a couple of hours, you can expose the heatshrinks to 240°C without melting or breaking effects
no corrosion effects in contact with copper
very low water absorption of only ~0.25%
dielectric strength of 20KV per mm
very good resistance to chemicals, oil, cleaning agents
no printings on the heatshrinks

We constantly keep our heatshrinks on top of what's technically possible - today and in the future.

Manufacturer: MDPC-X

Manufacturer Part Number: HS-S-BK

€4³¹ (€3⁶² excluding VAT)

Quantity:

+ −

Add to cart

MDPC-X Heatshrink 4:1 SMALL - Red, 1m

30 item(s)

Return period: 720 days

Weight: 0.010 kg

Product Code:27297

Manufacturer: MDPC-X

Heatshrink 4:1 SMALL:•The inner diameter is 7.0mm before shrinking•After maximum shrinking, the inner diameter is 1.75mm•Shrink ratio of 4 to 1

No compromise – the highest level in heatshrink quality

As with the famous MDPC-X Sleeving, the MDPC heatshrink quality is globally regarded as the best-in-class, since MDPC started in 2007.

Instead of beginning to talk about all kind of technical data, test results and specifications, here is what users typically told us about our heatshrinks: "Hello MDPC, I just wanted to tell you that I have used so many different heatshrinks in my professional career, but yours top them all in every aspect."

MDPC just offers what can’t be exceeded in quality; otherwise we would not offer it. While most manufacturers of heatshrinks went the cost-saving route in the last years and the available quality degraded, our quality stayed the same.

What makes a good heatshrink for us?

First of all we like ultra-thin walls. It just looks awesome and you can easily over-expand it in order to extend its original diameter even more. MDPC offers the thinnest walls in relation to its corresponding shrink-ration.
We love a high shrink-ratio, so one heatshrink-size can be used in many situations easily and effectively. "1:1" would mean that it does not shrink at all. "2:1" means that it shrinks down to 1/2 of its original diameter. "3:1" means that it shrinks to 1/3, "4:1" means that it shrinks down to an amazing 1/4. MDPC offers unusual shrink-rates, which make your work as easy as possible.
Absolutely smooth surfaces with a matte appearance is not a very common combination, but MDPC gives this to you.
While being ultra-thin, it is important that the heatshrink does not burn so quickly. With this property, it is easy to melt MDPC Sleeve underneath the shrink by applying temperatures of more than 250°C. The very thin walls help you to see when the sleeve melts. You recognize it as soon as the footprint of the sleeving edge underneath the heatshrink turns into a smooth transition.
Different colors are very important, so people can color-code their cables and of course support their designs in a beautiful way.

To sum up what MDPC-X heatshrink stands for: Only the best in heatshrink-technology and design is good enough for us. If something could be done better, we have already done it.

How to use heatshrink in combination with MDPC-X sleeve

You either need a heatgun or lighter to shrink the heatshrink. A hair-dryer is not enough to shrink to the minimum diameter. For colored heatshrinks, we recommend to only use a heatgun.

Using a lighter, the best technique is as follows: Only use the lower portion of the flame (the flame should be at least 3 cm long) and move it into the heatshrink and out of it again and again, while twisting the cable & heatshrink from time to time, so you heat it up at different sides.

Let the heatshrink completely cool down, before you apply any length-stretching-force onto the MDPC-X Sleeve. Once the heatshrink is cooled down, it turns hard and holds the sleeve in position. If you want to move a cable-end into a connector (i. e. ATX wire into ATX connector), you can heat up the front of the heatshrink, so it gets soft again and adjusts perfectly to the inner shape of a connector. Learn more about using our heatshrink for “melting” techniques in the previous section.

FAQ: How do I over-expand my heatshrink?

Just take a long-nosed plier and put the heatshrink over the closed tips. Then you carefully open the pliers so the heatshrink gets stretched. Reposition the heatshrink so the stretching applies on other areas of the surface too. This avoids that the surface gets too unstable at the over-expanded area. Experiment with these techniques and you will quickly learn what you can do and what not. When you heat up an over-expanded heatshrink, be more careful with the heat application than you usually are. Let it cool down from time to time. Mastering this technique allows you to get the heatshrink over connectors, which are slightly too big for the "regular" heatshrink size.

Technical properties of current generation MDPC heatshrinks

Here are the most important specifications, which might help you in your work with our heatshrinks.

the heatshrinks will start to shrink at ~95°C
the heatshrinks can be constantly exposed to 160°C
for a couple of hours, you can expose the heatshrinks to 240°C without melting or breaking effects
no corrosion effects in contact with copper
very low water absorption of only ~0.25%
dielectric strength of 20KV per mm
very good resistance to chemicals, oil, cleaning agents
no printings on the heatshrinks

We constantly keep our heatshrinks on top of what's technically possible - today and in the future.

Manufacturer: MDPC-X

Manufacturer Part Number: HS-S-RD

€3⁴³ (€2⁸⁸ excluding VAT)

Quantity:

+ −

Add to cart

Heatshrink 9mm - black, 1m

12 item(s)

Return period: 720 days

Weight: 0.020 kg

Product Code:9865

Heatshrink Color: Black, Heatshrink Diameter: 9mm, Manufacturer: Custom PC Systems

Heatshrink Color: Black

Heatshrink Diameter: 9mm

Manufacturer: Custom PC Systems

Manufacturer Part Number: H3N0.38-BK

€5⁴⁵ (€4⁵⁸ excluding VAT)

Quantity:

+ −

Add to cart

Heatshrink 9mm - white, 1m

Out of stock

Return period: 720 days

Weight: 0.020 kg

Product Code:9866

Heatshrink Color: White, Heatshrink Diameter: 9mm, Manufacturer: Custom PC Systems

Heatshrink Color: White

Heatshrink Diameter: 9mm

Manufacturer: Custom PC Systems

Manufacturer Part Number: H3N0.38-WH

€5⁴⁵ (€4⁵⁸ excluding VAT)

Out of stock

Heatshrink 19mm - red, 1m

16 item(s)

Return period: 720 days

Weight: 0.030 kg

Product Code:10261

Heatshrink Color: Red, Heatshrink Diameter: 19mm, Manufacturer: Custom PC Systems

Heatshrink Color: Red

Heatshrink Diameter: 19mm

Manufacturer: Custom PC Systems

Manufacturer Part Number: H3N0.75-RD

€5³⁶ (€4⁵⁰ excluding VAT)

Quantity:

+ −

Add to cart

Heatshrink 9mm - red, 1m

14 item(s)

Return period: 720 days

Weight: 0.020 kg

Product Code:10471

Heatshrink Color: Red, Heatshrink Diameter: 9mm, Manufacturer: Custom PC Systems

Heatshrink Color: Red

Heatshrink Diameter: 9mm

Manufacturer: Custom PC Systems

Manufacturer Part Number: H3N0.38-RD

€2⁷⁴ (€2³⁰ excluding VAT)

Quantity:

+ −

Add to cart

Heatshrink 6mm - blue, 1m

10 item(s)

Return period: 720 days

Weight: 0.010 kg

Product Code:10478

Heatshrink Color: Blue, Heatshrink Diameter: 6mm, Manufacturer: Custom PC Systems

Heatshrink Color: Blue

Heatshrink Diameter: 6mm

Manufacturer: Custom PC Systems

Manufacturer Part Number: H3N0.25-BL

€3⁷⁵ (€3¹⁵ excluding VAT)

Quantity:

+ −

Add to cart

Heatshrink 6mm - red, 1m

8 item(s)

Return period: 720 days

Weight: 0.010 kg

Product Code:10479

Heatshrink Color: Red, Heatshrink Diameter: 6mm, Manufacturer: Custom PC Systems

Heatshrink Color: Red

Heatshrink Diameter: 6mm

Manufacturer: Custom PC Systems

Manufacturer Part Number: H3N0.25-RD

€3⁹⁹ (€3³⁵ excluding VAT)

Quantity:

+ −

Add to cart

Heatshrink 9mm - blue, 1m

50 item(s)

Return period: 720 days

Weight: 0.020 kg

Product Code:10506

Heatshrink Color: Blue, Heatshrink Diameter: 9mm, Manufacturer: Custom PC Systems

Heatshrink Color: Blue

Heatshrink Diameter: 9mm

Manufacturer: Custom PC Systems

Manufacturer Part Number: H3N0.38-BL

€2⁷⁴ (€2³⁰ excluding VAT)

Quantity:

+ −

Add to cart

Heatshrink 9mm - yellow, 1m

3 item(s)

Return period: 720 days

Weight: 0.020 kg

Product Code:10507

Heatshrink Color: Yellow, Heatshrink Diameter: 9mm, Manufacturer: Custom PC Systems

Heatshrink Color: Yellow

Heatshrink Diameter: 9mm

Manufacturer: Custom PC Systems

Manufacturer Part Number: H3N0.38-YL

€3⁸⁷ (€3²⁵ excluding VAT)

Quantity:

+ −

Add to cart

Heatshrink19mm - blue, 1m

12 item(s)

Return period: 720 days

Weight: 0.030 kg

Product Code:10508

Heatshrink Color: Blue, Heatshrink Diameter: 19mm, Manufacturer: Custom PC Systems

Heatshrink Color: Blue

Heatshrink Diameter: 19mm

Manufacturer: Custom PC Systems

Manufacturer Part Number: H3N0.75-BL

€4¹¹ (€3⁴⁵ excluding VAT)

Quantity:

+ −

Add to cart

Heatshrink 6mm - yellow, 1m

34 item(s)

Return period: 720 days

Weight: 0.010 kg

Product Code:10576

Heatshrink Color: Yellow, Heatshrink Diameter: 6mm, Manufacturer: Custom PC Systems

Heatshrink Color: Yellow

Heatshrink Diameter: 6mm

Manufacturer: Custom PC Systems

Manufacturer Part Number: H3N0.25-YL

€2⁶² (€2²⁰ excluding VAT)

Quantity:

+ −

Add to cart

Heatshrink 19mm - yellow, 1m

9 item(s)

Return period: 720 days

Weight: 0.030 kg

Product Code:10583

Heatshrink Color: Yellow, Heatshrink Diameter: 19mm, Manufacturer: Custom PC Systems

Heatshrink Color: Yellow

Heatshrink Diameter: 19mm

Manufacturer: Custom PC Systems

Manufacturer Part Number: H3N0.75-YL

€4¹¹ (€3⁴⁵ excluding VAT)

Quantity:

+ −

Add to cart

Heatshrink

Sidebar Subcategories Sidebar Subcategories

No compromise – the highest level in heatshrink quality

What makes a good heatshrink for us?

How to use heatshrink in combination with MDPC-X sleeve

FAQ: How do I over-expand my heatshrink?

Technical properties of current generation MDPC heatshrinks

No compromise – the highest level in heatshrink quality

What makes a good heatshrink for us?

How to use heatshrink in combination with MDPC-X sleeve

FAQ: How do I over-expand my heatshrink?

Technical properties of current generation MDPC heatshrinks

No compromise – the highest level in heatshrink quality

What makes a good heatshrink for us?

How to use heatshrink in combination with MDPC-X sleeve

FAQ: How do I over-expand my heatshrink?

Technical properties of current generation MDPC heatshrinks

No compromise – the highest level in heatshrink quality

What makes a good heatshrink for us?

How to use heatshrink in combination with MDPC-X sleeve

FAQ: How do I over-expand my heatshrink?

Technical properties of current generation MDPC heatshrinks

No compromise – the highest level in heatshrink quality

What makes a good heatshrink for us?

How to use heatshrink in combination with MDPC-X sleeve

FAQ: How do I over-expand my heatshrink?

Technical properties of current generation MDPC heatshrinks

No compromise – the highest level in heatshrink quality

What makes a good heatshrink for us?

How to use heatshrink in combination with MDPC-X sleeve

FAQ: How do I over-expand my heatshrink?

Technical properties of current generation MDPC heatshrinks

Information

My account

Buyer help

Custom PC Solutions LTD

Buy with us

Extras

Services

About us footer

Connect With Us

Information

Buyer help

My account

Buy with us

Extras

Services

About us footer

Custom PC Solutions LTD

Connect With Us